Product Description
80A Coupling For Excavator Hydraulic Engine Parts For DX380LC-3 DT70
Basic information:
Product Name | High Quality Excavator Coupling 4AS Shaft Coupling |
Place of Origin | ZheJiang China (Mainland) |
MOQ | No limited |
Flexible or Rigid | Flexible |
Function | Connect Different Parts |
Supply Ability | 3000pcs per week |
Lead Time | Within 1-3 Working Days After Receive The Payment |
HS Code | 8483600090 |
Outer Packing | Carton |
Product show as below:
About us:
specialized in:
couplings, rubber mounts, gera parts, hydraulic seals and seal kits for hydraulic hammers, rock breakers, hydraulic excavators,wheel loaders, and JCB badkhoe loaders.
And, Our company also supply:
Engine parts, hydraulic piston pump and hydraulic travel motor, Swing motor assembly and hydraulic component parts, electric parts, etc. Hydraulic hammer breaker parts with piston, cylinder, chisel, through bolt, side bolt, top bush, front head bushing,accumlator, valve, etc.
We always try our best for all our customers and make it better and better. Welcome!
FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Materials Used in Manufacturing Helical Couplings
Helical couplings are typically constructed from a variety of materials, chosen based on their mechanical properties and compatibility with specific applications:
- Stainless Steel: Stainless steel is a common choice due to its corrosion resistance and high strength. It is suitable for various environments, including those with exposure to moisture or chemicals.
- Aluminum: Aluminum is lightweight and offers good corrosion resistance. It’s often used in applications where weight is a concern, such as in aerospace or robotics.
- Steel Alloys: Steel alloys provide a balance between strength and cost-effectiveness. They are used in a wide range of industrial applications.
- Brass: Brass offers good corrosion resistance and is often used in applications where electrical conductivity is required.
- Plastics and Polymers: Some helical couplings are made from plastics or polymers to reduce weight and minimize electrical conductivity. These materials are often used in precision instruments and medical devices.
The choice of material depends on factors such as the intended application, environmental conditions, load requirements, and desired level of corrosion resistance. Engineers consider these factors to ensure that the selected material aligns with the performance and longevity expectations of the helical coupling.
Considerations for Choosing a Helical Coupling for Your Application
When selecting a helical coupling for a specific application, several key factors should be considered:
- Torque Capacity: Determine the maximum torque that the coupling will need to transmit in your application. Choose a coupling with a torque capacity that exceeds the application’s requirements.
- Shaft Size: Ensure that the coupling’s bore size matches the diameter of the shafts to be connected. Proper sizing prevents slippage and ensures efficient torque transmission.
- Angular Misalignment: Evaluate the degree of angular misalignment that the coupling needs to accommodate. Different couplings have varying angular misalignment capabilities.
- Radial Misalignment: Consider the amount of radial misalignment that the coupling must handle. Choose a coupling that can accommodate the expected radial displacement.
- Axial Misalignment: If there will be axial movement between the shafts, select a coupling that can handle the required axial displacement without binding.
- Environmental Conditions: Take into account the operating environment, including temperature, humidity, dust, and chemical exposure. Choose a coupling material that is suitable for the conditions.
- Speed: Determine the rotational speed of the shafts. Ensure that the chosen coupling is rated for the application’s speed without causing resonance or vibration issues.
- Backlash: Assess the acceptable level of backlash in your application. Some couplings have minimal backlash, which is critical for precision applications.
- Cost: Consider the budget for your project. While it’s important to choose a reliable coupling, also balance the cost with the performance requirements.
By carefully evaluating these factors and consulting with coupling manufacturers or experts, you can choose the right helical coupling that meets the needs of your specific application.
Elaboration on Torsional Stiffness in Relation to Helical Couplings and Its Significance
Torsional stiffness refers to the resistance of a helical coupling to twisting or rotational deformation under a certain amount of torque. It is a crucial mechanical property that impacts the performance of helical couplings:
- Response to Torque: A coupling with higher torsional stiffness can transmit torque more efficiently and accurately, resulting in better power transmission.
- Reduced Torsional Deflection: High torsional stiffness minimizes torsional deflection, which is the angular twist experienced by the coupling under torque. This is especially important in precision applications where accurate angular positioning is required.
- Minimized Backlash: Torsional stiffness helps reduce backlash, which is the angular play or movement between connected shafts when the direction of torque changes.
- Dynamic Performance: Torsional stiffness contributes to the coupling’s ability to respond quickly to changes in torque, making it suitable for applications with rapidly changing loads.
- Vibration Damping: While helical couplings provide some level of flexibility to accommodate misalignment, their torsional stiffness helps dampen vibrations and resonances.
- Torsional Resonances: In applications where torsional resonances can occur, a well-matched torsional stiffness can help avoid critical speeds and potential mechanical failures.
When selecting a helical coupling, considering its torsional stiffness in relation to the application’s torque requirements and performance demands is essential to ensure optimal functionality and durability.
editor by CX 2024-04-15
China manufacturer & factory supplier for china in Cucuta Colombia supplier Poclain motorhydraulic wheel loader with hydraulic transmissionsmall two-way hydraulic cylinder With high quality best price & service
Manufacturer of regular and custom roller chains. Appropriate for getting older, pressure relieving, heat dealing with and powder coating apps. Aerospace, automotive, army, power, composite, pharmaceutical and a variety of other industries served. Turnkey programs integration and most things available in stock.In 2000, EPG took the guide in gaining ISO14001 setting management certificate and thereafter handed the inspection of clear creation and recycling economy, successful the title of “Zhejiang Eco-friendly Business”.
Overview
Common goods and individualized answers for an optimum generate
Our factory has acquired the certification of China’s Farm Machinery Merchandise Top quality Authentication promulgated by the Farm Equipment Items High quality Authentication Centre of China.
Quick Specifics
- Soon after Warranty Provider:
-
Movie complex assistance
- Neighborhood Service Location:
-
Egypt
- Showroom Location:
-
Egypt
- Type:
-
components
- Soon after-sales Support Provided:
-
Movie technical assistance
Provide Potential
- Provide Ability:
- 3000 Piece/Parts for every Month
Packaging & Shipping and delivery
- Packaging Information
- packaged in plywood scenario or PALLET
- Port
- NINGBO/SHANGHAI, CHINA
-
Direct Time
: -
Quantity(BagThe EP Line PTO travel shafts are recognizable simply because of the EP Line patented coupling mechanism and the versatile cone. The PTO push shafts are distinguished by means of user-friendliness, compactness and attractive layout.s) one – 20 >20 Est. Time(days) fifteen To be negotiated
On the web Customization
TYPE |
Displacement (ml/r) |
Force (Mpa) |
Torque (N.M) |
Speed range |
Max Cont Energy |
|||
Single Velocity |
Double Pace |
Peak force |
Cont Strain |
Rate torque |
Theoric torque |
|||
TMS83-6700 | 6679 | 3340 | 35 | twenty five | 25258 | 1010 | -65 | 123 |
TMS83-8300 | 8328 | 4164 | 35 | 25 | 31495 | 1259 | -50 | 123 |
TMS83-10000 | 10019 | 5010 | 35 | twenty five | 37890 | 1515 | -forty | 123 |
TYPE |
Displacement (ml/r) |
Pressure (Mpa) |
Torque (N.M) |
Speed range |
Max Cont Power |
|||
Single Pace |
Double Velocity |
Peak force |
Cont Stress |
Rate torque |
Theoric torque |
|||
TMS125-10000 | ten thousand | 5000 | thirty | 25 | 37818 | 1512 | -50 | a hundred and fifty |
TMS125-12500 | 12500 | 6250 | thirty | 25 | 47273 | 1890 | -forty | a hundred and fifty |
TMS125-15000 | 15000 | 7500 | thirty | twenty five | 56727 | 2269 | -thirty | 150 |
China manufacturer & factory supplier for Travel in Winnipeg Canada Drive Hydraulic Motor Traveling Drive Motor For Crawler Machines With high quality best price & service
industrial elements like roller chains. Roller chains are accessible in normal, nickel plated & stainless steel materials in pitch dia. ranging from 1/4 in. to 3 in. Sorts incorporate leaf chains in lacing conOur items is common exported to the United States, Germany, Australia, Russia, Spain, Hungary, Zimbabwe, Ukraine, Nigeria, Peru, Brazil, Center and South The united states, Thailand, Pakistan, Indonesia, much more than 60 countries and regions.figurations ranging from 2 x 2 to 8 x 8. Leaf chains are obtainable in pitch measurements ranging from 1/2 in. to 2 in., pin dia. ranging from .156 in. to .687 in. & tensile strengths ranging from 4,000 lbs. to 156,000 lbs. Purposes incorporate agricultural, conveyors, drilling, electronics assembly, foodstuff processing, fork lift vehicles, hoists, packaging & textile equipment.EPG is a professional producer and exporter that is concerned with the design, advancement and manufacturing.
Overview
Quick Specifics
- Relevant Industries:
-
Producing Plant, Machinery Repair Stores, Farms, Retail
- Model Title:
-
OEM
- Output Torque:
-
–
- Input Velocity:
-
–
- Output Pace:
-
–
- Solution title:
-
Journey Generate Hydraulic
Supply Capability
- Provide Capacity:
- ten thousand Piece/Pieces per Month
Packaging & Shipping
- Packaging Details
- wooden scenario
- Port
- Shanghai/Ningbo
-
Direct Time
: -
Quantity(Items) one – one >1 Est. Time(days) forty five To be negotiated
On the web Customization
Item Description
Vacation Generate Hydraulic Motor / Traveling Drive Motor For Crawler Equipment
journey push hydraulic motor are a high torque and higher efficiency, EP journey motor especially made for crawler devices. The travel motor can be customized to fit the customer’s needs with several different ratios and displacements available.
Functions
The piston motor has a variable displacement (2-speed) swash plate and incorporates a brake valve and mechanical brake. Blended with a scenario-rotation sort planetary gear reducer, the EP travel motor offers the pursuing fantastic attributes:
– Hydraulically balanced piston motor ensures substantial-stress higher-efficiency operation.
– An offset-kind 2-velocity layout assures reliable changeover of the displacement by an exterior pilot manage (pace ratios of between 1.5:1 and 2:1)
– The motor delivers a built-in double counterbalance valve and shockless crossover relief valve, delivering pace control and braking with least shock.
– The mechanical brake is a negative brake connected with the counterbalance valve. The brake is routinely activated or unveiled when the car stops or commences.
– The case-rotation variety gear reducer has improved sturdiness and trustworthiness due to substantial precision areas and an similarly-loaded layout.
– The hydraulic motor uses heavy duty bearings to make certain long lifestyle. Floating seals also avert dust or drinking water from moving into into the motor.
Solution Title |
Journey Travel Hydraulic Motor / Traveling Generate Motor Girard DYN range-2 Our variety of worm gearboxes is notably suited to demanding stepper and servo motor purposes.For Crawler Equipment |
Relevant Merchandise
81X Lumber Chain
Refuse Drag Chains
SUGAR MILL CHAINS
Our Organization
Ever-energy is specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm gearboxes, in-line Near up of two yokes with the universal joint. Notice the slight oozing of grease from the UJ seal ends, the clump of grease is from inside the yoke splined shaft spot –Generate (outer) yoke has a woman (common spline) gap and “Y” form stop that is the common joint (UJ) mount. –UJ is a cross formed casting getting roller bearings enclosed with caps at all 4 details and is held into the yoke with 4 “C” clips –Internal yoke and generate shaft is one more yoke welded to the push finish, of the push shaft. –Driven shaft and interior yoke is the pushed shaft that rides inside of of the drive shaft and has a yoke welded at the pushed stop –UJ yet another UJ as abovehelical gear velocity reducers, parallel shaft helical equipment reducers, helical bevel reducers, helical worm equipment reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto travel shafts, special reducer & relevant equipment parts and other connected merchandise, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl pace variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm gearboxes and so on. additionally, we can create customized variators, geared motors, electric powered motors and other hydraulic goods in accordance to customers’ drawings.
We offers a trustworthy gurantee for the product’ s high quality by superior inspection and testing gear. expert specialized crew, beautiful processing technology and rigorous control technique.
In latest years, the organization has been creating swiftly by its prosperous knowledge in production, adcanced managemant method , standardized management technique, sturdy technical power. We often adhere the notion of survial by good quality, and decelopment by innovation in science and technological innovation.
Ever-energy is inclined to operate with you hand in hand and create brilliance together!
Grinding Workshop
CNC Enamel Equipment
CNC Lathe Workshop
Figuring Centre
CNC Workshop
Heat Treatment method Device
3D Measurement Machinery
Substance accessible
Lower carbon metal, C45, 20CrMnTi, 42CrMo, 40Cr, stainless steel. Can be adapted with regards to client needs.
Surface treatment
Blacking, galvanization, chroming, electrophoresis, shade portray, …
Heat therapy
High frequency quenching warmth remedy, hardened tooth, carbonizing, nitride, …
Certifications
FAQ
Q: Are you buying and selling company or manufacturer ?
A: Our group is made up in 3 factories and 2 abroad product sales companies.
Q: Do you give samples ? is it free or extra ?
A: Of course, we could supply the sample for free of charge demand but do not pay the price of freight.
Q: How prolonged is your supply time ? What is your phrases of payment ?
A: Usually it is 40-forty five days. The time might vary depending on the item and the stage of customization. For common goods , the payment is: 30% T/T in progress ,harmony before shippment.
Q: What is the precise MOQ or cost for your item ?
A: As an OEM organization, we can offer and adapt our products to a vast assortment of wants.Hence, MOQ and price tag could drastically differ with dimensions, content and further technical specs For instance, costly goods or common items will normally have a lower MOQ. Make sure you contact us with all related specifics to get the most precise quotation.
If you have an additional concern, make sure you feel free to make contact with us.
Packing & Delivery
Providers
Also I would like to just take this opportunity to give a transient introduction of our At any time-Electricity firm:
Our company is a well-known producer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china .
We have exported many products to our buyers all in excess of the planet, we have lengthy-time expertise and strong technologies support.
Some of our consumer :
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Germany: SILOKING ,GKN , KTS
France: Itfran, Sedies
Brazil: AEMCO ,STU
United states: John Deere , BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR , CANIMEX ,RingBall
……
-Ø Our Business with in excess of twelve year’s history and one thousand employees and twenty sales.
-Ø With in excess of 100 Million USD income in 2017
-Ø With advance equipment equipments
-Ø With big function capacity and substantial top quality handle, ISO licensed.
…. .
you also can check out our web site to know for much more specifics, if you need to have our merchandise catalogue, please speak to with us.
Best China manufacturer & factory china in Rajkot India factory supplier hydraulic motors Orbital motors With high quality best price
We will offer very best companies and large quality items with all sincerity. a specialized provider of a full variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….
For all body measurements, housings are made from injected aluminium, which lend this sequence an optimum performance when used in programs requiring reduced torque, and an efficiency equivalent to the a single of cast-iron goods.
Overview
Swift Information
- After Guarantee Service:
-
Video clip specialized support
- Regional Service Location:
-
Egypt
- Showroom Area:
-
Egypt
- Type:
-
elements
-
One route Cost-free WHEEL (RA) One route PAWL torque limiter (SW) Disc torque limiter clutch with spring (FFT)
- Following-product sales Support Presented:
-
Video technical assistance
Provide Capability
- Offer Ability:
- 500000 Piece/Items per Year
Packaging & Shipping and delivery
- Packaging Particulars
- Carton or Plywood scenario
- Port
- NINGBO/SHANGHAI, CHINA
-
Guide Time
: -
Amount(Baggage) one – fifty >50 Est. Time(days) 15 To be negotiated EPG Machinery is situated in XiHu Region HangZhou Zhejiang ,China. It is 30km from our factory to HangZhou global airport.
On-line Customization
BMH Complex Info
TYPE | BMH-two hundred | BMH-250 | BMH-315 | BMH-400 | BMH-five hundred | |
Displacement(ml/r) | 203 | 253.seven | 318.nine | 405.9 | 471.1 | |
Max.Pressure.Drop(Mpa) | cont. | sixteen | sixteen | 15 | 14 | 12 |
int. | 19 | 19 | eighteen | 17 | 15 | |
peak. | 22 | 22 | 21 | twenty | eighteen | |
Max.torque(N.m) | cont. | 425 | 530 | 610 | 825 | 720 |
int. | 510 | 635 | 750 | 900 | 910 | |
peak. | 590 | 735 | 875 | 1055 | 1090 | |
Max. Speed (cont.)(r/min) |
365 | 295 | 235 | one hundred eighty | 155 | |
Max.Movement(cont.)(L/mim) | seventy five | 75 | 75 | 75 | seventy five | |
Max.Output.Electricity(cont.)(Kw) | 13.8 | 13.8 | twelve.five | eleven.5 | nine.8 | |
Weight(Kg) | ten.five | eleven | eleven.five | twelve.five | thirteen |
Intermittent procedure the permissible values may possibly happen for max.10% of each minute
Peak load:the permissible values could occur for max.1% of every minute
Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Kubota SS805-K750 Mega Stainless Steel Table Top Chain in Rustenburg South Africa D1105 Portable Mobile Light Tower with 9m Hydraulic Mast with ce certificate top quality low price
We – EPG Group the largest Chain and agricultural gearbox factory in China with 5 diverse branches. For a lot more information: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828
We supply OEM services. EPG In 2008, it was awarded with “Nationwide Export Commodity Inspection-cost-free Company”. roller chain fulfills or exceeds ANSI standards and is created in ISO licensed factories. As is the case with our pillow block bearings and ball bearings, our roller chain areas are analyzed prior to shipment to insure quality. The roller chain elements and roller chains we supply are pre-stretched to insure you have constrained sag. It also comes with solid rollers, making certain that it is of the optimum good quality. One particular facet of our application consulting is that we have been collecting and combining the encounter in chain and sprocket purposes in numerous regions for a long time. This is especially interesting for us whenever consumers strategy us with some exceeding and tough needs.
EPT Mine Technical specs:
*Lockable battery isolator
* EPT protection valve on all cylinders
* EPT circuit protection switches
*Safety warning decals
* EPT with inertial brake program on the axle
* EPT stabilizers
*Off street whee EPT with wheel indicators & all terrain 235/85R16 tyres
*50ºC ambient cooling
*StHangZhourd tow hitch 75mm pintle ring kind (3.5 ton) with Brake reservoir safety bracket
*Hefty responsibility swing absent jockey wheel fit on the right hand of draw bar
*Rugged mine spec chassis and cabin
*Off road suspension
*Cable observe
*LED site visitors change and end trailer lights
*Forklift pockets and central lift position with certification strength
*Tie down
*Soar start off receptacle
*Gasoline evacuation faucet
*7 pins spherical trailer plug
*Earth rod
*Rubber vibration dampers
*Metal fenders with mud flaps fitted
*Freeway protection chains with snap hook
*Fire extinguisher
*Weatherproof lockable enclosure
*Wheel chocks on the outside the house of the trailer
*Reflective Mine Striping with yellow and black
*Higher h2o temperature and minimal oil strain auto shutdown system
*Beacon
*Unexpected emergency stop with out cap
*Admirer and belt guards
*PLC controller
Important Components Specs
*Engine: EPT D905 or D1105 1500/1800rpm
*Generator: 48V DC 6kVA
*Commencing:12V DC
*Lights: 4×1500W Metal Halide
*Tower: Hydraulic
*Fuel tank:one hundred thirty L
Trailer dimension
*Dimension and Fat
*2450×1820×2160MM
*Wet excess weight:1960kgs
Trailer and Mast
*Scorching Dipped Galvanized Sub Framed & Mud Guards & Outriggers
*Out of doors Powder Coated Cover
*Twin Axles
*Tubeless Tyres ten ply
* EPT Ma EPT Rotation
*Mild Bar Tilt
*Quality of manage panel doorway seal
* EPT design of over stream bottle body
*E-cease
*Fit ma EPT lock pin with holder
*Central lift and fork raise and ma EPT receiver
*Large duty gasoline filter
*Versatile line with protection of hydraulic brake line
* EPT tide up of exhau EPT
*Wheel nut indicator
*Offroad 235/85R16 wheel
*Jockey wheel mount on the of attract bar
*Brake reservoir protection bracket
*IP66 lockable circuit breaker box
*75mm Pintle ring type (3.5 ton)
*Tail mild plug holder on the attract bar
*Four points underneath the chassis or two factors on the tower mast
*Reflectors and aspect lights
*Variety plate mount and amount plate light-weight
*A guard shall be installed in excess of the exterior outlet of exhaust
*Air Filter Pre cleaner
*Openable Radiator for cleansing and obtain at rear panel
*Call for Bund Evacuation factors
BRIGHTER KLT-10000 Attributes
Brighter Mine Spec hefty obligation Cell: +86~13083988828 lights tower KLT-10000 is a marketplace chief in the design, manufacturing and distribution of lighting options globally. Every single tower attributes the mo EPT reliable factors, with built-in functions that makes certain optimum light-weight output on your worksite and ideal productiveness.
Why Brighter KLT-10000?
OUR Technological Specialists Group Service
If customisation specifications are what you are after, Our technical specialists group who can perform with you to create bespoke options for your specifications.
CUSTOMISATION SPECIFICATION
We supply robu EPT and trustworthy items for the mo EPT tough and demanding purposes. Our engineering team can custom made-style and manufacture bespoke equipment to match any specification provided.
Reduced Procedure AND Routine maintenance Charges
We think in optimising performance and decreasing downtime to make possession secure, straightforward and price-successful for you. We have refined our product selection by way of layout, producing and by servicing our personal equipment, which operates in the harshe EPT conditions. We are very pleased to manufacture top quality products with lowered downtime and strength utilization, maintaining your operations and routine maintenance expenses down.
BRO EPT AND Adaptable OPTIONAL CONFIGURATION
We offer an extensive assortment configuration of Lighting Towers, to meet and exceed customer expectations in all market place segments.
High quality Client Services AND AFTERSALES
Our brand engines and alternators support network planet extensive to make confident you can accessibility competent, expert and hugely competent professionals when you want them most.
Stock AND EPT Ability
We realize rapid turnaround is important to you. That’s why our Gentle Tower inventory system supplies you with fa EPT access to gear solutions when you need to have the most.
OUR Companions:
Kubota,Yanmar,Perkins,Stamford,Leroysomer,Meccalte,Deepsea,Smartgen
Brighter | KLT-8000 | KLT-10000V | KLT-8000 LED | KLT-10000V LED | KLT-ten thousand Mine Requirements | KLT-10000 LED Mine Specs | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Light protection mtwo | 4.000 (common twenty luxes) |
4.000 (regular 20 luxes) |
5.000 (average 20 luxes) |
5.000 (regular twenty luxes) |
6.000 (common twenty luxes) |
8.000 (typical twenty luxes) |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lamps | Metal Halide | Metal Halide | LED | LED | Metal Halide | LED | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mast | Laydown or Vertical Manual | Vertical Hydraulic | Laydown or Vertical Manual | Vertical Hydarulic | Laydown Hydarulic | Laydown Hyraulic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Characteristics | Powder coat cover | Gull wing cover | Powder coat canopy | Powder coat canopy | Powder coat canopy | Powder coat cover | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Performance Knowledge sixty sixty sixty | 50 60 | 50 sixty | 50 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rated Voltage | VAC | 230 a hundred and twenty a hundred and twenty | 230 a hundred and twenty one hundred twenty 120 | 230 or DC48V | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rated Electrical power (PRP) | kW | 6 eight | 6 85five 8 or higher | 6 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Operating Temperature (min / max) |
ºC | -25/fifty | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sound Stress Stage EPT Electronic mail [email protected] 1m(LPA) |
dB(A) | 90 | 90 | 86 | 86 | 87 Energy EPT E-mail [email protected] 7m (LPA) | dB(A) | 65 | 65 | 63 | 63 | 71 73 | 65 | ||||||||||||||||||||||||||||||||||||||||||||||||||
Engine 1800 | 1500 Net 9,5 | 8.4 5fivefive | 8.4 five | 8.4 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Coolant | Water | Water | Water | Water | Water | Water | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Number of cylinders | 3 | 3 | 2 or three | 2 or 3 | 3 | 3 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Alternator | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Model | SMU 132C | SMU 132C | SMU 132B | SMU 132B | SMU 132D | SMU 132C or DC48v | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rated output | kVA | 6 8 | 6 8 5 | 4 5 | 8 | 6 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Insulation / Enclosure defense | class / IP |
H / 23 | H / 23 | H / 21 | H / 23 | H / 23 | H / 23 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Consumption | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Fuel tank capacity | litre | 100 | 100 | 70 | 70 | 130 | 130 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Runtime just before with lamps ON | hrs | 60 | 60 | 100 | 100 | 90 | 65 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Electricity Output | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Auxiliary Electricity4four | 1 | 1 two | 2 | 2,3 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Lights | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Floodlights | Metal halide | Metal Halide | LED | LED | Metal halide | LED | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Wattage | W | 4 x 1000 | 4 x 1000 | 4 x 350 | 4 x350 | 4 x 1500 | 6x four hundred | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mast | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Type | Manual | Hydraulic | Manual | Hydarulic | Hydarulic | Hydraulic | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rotation | degrees | 360 | 360 | 360 | 360 | 360 | 340 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Maximum Peak | m | 9 or eight | 9 | 9 or eight | 9 | 9 | 9 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Maximum Velocity wind | km / h | 80 | 80 | 80 | 80 | 80 | 80 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Enclosure and Trailer |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Type | Ball or hitch resolve or adjustable towbar or site trailer with leaf or rubber suspension | Ball or hitch repair or adjustable towbar or website trailer with leaf or rubber suspension | Ball or hitch correct or adjustable towbar or internet site trailer with leaf or rubber suspension | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Base Body | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Enclosure | Steel canopy and powder coating paint | Metal cover and powder coating paint | Steel cover and powder coating paint | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Proportions and weigth | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions in transportation Fix Towbar (LxWxH) |
m | 1,9 x 1,29 x1,63 | 2,35 x 1,6 x 2,five | 1,67 x 1,10 x 2,50 | 2,35 x 1,6 x 2,five | 2,35 x 1,61 x 2,five | 2,35 x 1,sixty one x 2,5 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight | kg | 800 | 1150 | 850 | 1200 | 1860 | 1960 |
The use of unique gear manufacturer’s (OEM) element quantities or emblems , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our company and the outlined substitute elements contained herein are not sponsored, accredited, or created by the OEM.
Best China manufacturer & factory Chinese supplier motor EPG hydraulic track motor dh36 151-2040 100cc track motor track With high quality best price
Every process, every section, every function in EPG is demanded to be done one step following another, carefully and cautiously, from material selection, reformation to manufacturing accessories, from components heat treatment to automatic assembly, from quality control to product inspection and testing and from order dealing to after sales service.
Overview
Quick Details
- Condition:
-
New
- Warranty:
-
1.5 years
- After Warranty Service:
-
Online support
- Local Service Location:
-
none
- Showroom Location:
-
none
- Type:
-
parts
- Brand Name:
-
OEM
- Place of Origin:Zhejiang, China
- Pressure:
-
–
- Structure:
-
–
- Certification:
-
–
- Weight:
-
–
- Power(W):
-
–
- Dimension(L*W*H):
-
–
Within our field of work is adapting our reducers from the catalogue to our costumer´s necessity by means of flanges, shafts, extensions, supports, etc. according to the necessities of their machines.
- After-sales Service Provided:
-
Video technical support
- Color:
-
Silver
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
TYPE | BMP-50 BMPH-50 |
BMP-80 BMPH-80 |
BMP-100 BMPH-100 |
BMThe lemon tube is suitable for transmissible power of 16-35HP, it is the preferred choice for high speeds and low torque transmission. The two-lobe lemon tube grants low vibrations up to 2600 rpm with lengths not exceeding 800mm. AC series with six-lobe tubes (star)P-125 BMPH-125 |
BMP-160 BMPH-160 |
BMP-200 BMPH-200 |
BMP-250 BMPH-250 |
BMP-315 BMPH-315 |
BMP-400 BMPH-400 |
|
Displcement (ml/r) |
52.9 | 79.3 | 98.2 | 120.9 | 158.7 | 196.4 | 241.8 | 317.3 | 392.9 | |
Max.Pressure. Drop (Mpa) |
cont. | 14 | 14 | 14 | 14 | 14 | 14 | 12 | 10 | 8 |
int. | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 17.5 | 14 | 12 | 10 | |
peak. | 22 | 22 | 22 | 22 | 22 | 22 | 20 | 15 | 13 | |
Max. torque (N.Mm) |
cont. | 97 | 148 | 183 | 229 | 295 | 364 | 369 | 404 | 416 |
int. | 125 | 189 | 238 | 292 | 382 | 470 | 444 | 501 | 531 | |
peak. | 149 | 222 | 276 | 340 | 445 | 532 | 568 | 555 | 596 | |
Max. Speed (cont.)(r/min) |
755 | 750 | 610 | 490 | 375 | 305 | 245 | 185 | 150 | |
Max. Flow (cont.)(L/min) |
40 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 | |
Max. Output. Power (cont.)(Kw) |
6.5 | 10 | 10 | 10 | 10 | 10 | 8 | 7 | 5.7 | |
Weight(kg) | 5.6 | 5.7 | 5.9 | 6 | 6.2 | 6.4 | 6.6 | 6.9 | 7.4 |
Best China manufacturer & factory china factory supplier Char-Lynn hydraulic motor 111-1054 111-1055 111-1056 111-1057 111-1058 Char-Lynn disc valve motors With high quality best price
we supply chromed bar and tubes for hydualic and pheumatic cylinders, pto shaft, agricultural gearboxes etc.
Overview
Quick Details
- Condition:
-
New
Cat 3 Point Hitch How do I operate the PTO on my tractor? Prior to running the PTO, you will need your tractor to reach the starting RPM (revolutions per minute). Once the starting RPM has been reached you can begin operating the PTO.
- Warranty:
-
1.5 years
- After Warranty Service:
-
Video technical support
- Local Service Location:
-
Egypt
- Showroom Location:
-
Egypt
- Type:
-
parts
- Brand Name:
-
OEM
- Place of Origin:Zhejiang, China
- Pressure:
-
hydraulic pressure, 1-20Mpa
- Structure:
-
hydraulic system
- Certification:
-
CE
- Weight:
-
≤14.3kg
- Power(W):
-
9000-18000
- After-sales Service Provided:
-
Video technical support
Supply Ability
- Supply Ability:
- 500000 Piece/Pieces per Year
Packaging & Delivery
- Packaging Details
- Carton or Plywood case
- Port
- NINGBO/SHANGHAI, CHINA
-
Lead Time
: -
Quantity(Bags) 1 – 50 >50 Est. Time(days) 15 To be negotiated
Online Customization
TYPE | BM3Y-80 | BM3Y-100 | BM3Y-125 | BM3Y-160 | BM3Y-200 | BM3Y-250 | BM3Y-315 | BM3Y-400 | BM3Y-500 | |
BM3YS-80 | BM3YS-100 | BM3YS-125 | BM3YS-160 | BM3YS-200 | BM3YS-250 | BM3YS-315 | BM3YS-400 | BM3YS-500 | ||
BM3YW-80 | BM3YW-100 | BM3YW-125 | BM3YW-160 | BM3YW-200 | BM3YW-250 | BM3YW-315 | BM3YW-400 | BM3YW-500 | ||
Displacement(ml/r) | 80.5 | 100.5 | 126.3 | 160.8 | 200.9 | 252.6 | 321.5 | 401.9 | 476.5 | |
Max.Pressure.Drop(Mpa) | cont. | 20.5 | 20.5 | 20.5 | 20.5 | 20.5 | 20 | 20 | 15.5 | 12 |
int. | 27.5 | 27.5 | 27.5 | 26 | 25 | 25 | 24 | 19 | 14 | |
peak. | 29.5 | 29.5 | 29.5 | 28 | 27 | 27 | 26 | 21 | 16 | |
Max.torque(N.m) | cont. | 226 | 282 | 355 | 451 | 564 | 684 | 870 | 813 | 728 |
int. | 293 | 365 | 459 | 559 | 672 | 845 | 1032 | 1021 | 903 | |
peak. | 306 | 383 | 481 | 588 | 708 | 891 | 1091 | 1141 | 1044 | |
Max. Speed (cont.)(r/min) |
805 | 745 | 590 | 465 | 370 | 295 | 230 | 185 | 155 | |
Max.Flow(cont.)(L/min) | 65 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | 75 | |
Max.Output.Power(cont.)(Kw) | 16 | 18 | 18 | 18 | 18 | 18 | 17 | 11 | 9 | |
Weight(kg) | 9.8EPG Drive Worm Gears Worm Gear Model HP Model HP double-enveloping worm gear speed reducers are designed for all applications that require extremely high torque and accuracy in a quiet, compact packag EPG Drive Worm Gear Model HPe. Model HP speed reducers have higher shock resistance, greater endurance to withstand heavy starting and stopping loads, and can easily transmit two to three times as much torque as cylindrical worm gearing. Precision is increased, and backlash, chatter and noise are minimized. These speed reducers are designed for applications such as metalworking machinery, printing equipment and packaging machinery, mining equipment, and many others. Model HP double and triple reduction worm gear speed reducers combine multiple single reduction speed reducers into one assembly. These units are built using true double-enveloping worm gearing. Each of the gearsets is supported by heavy-duty tapered roller bearings and housed in its own heat dissipating housing. | 10 | 10.3 | 10.7 | 11.1 | 11.6 | 12.3 | 13.2 | 14.3 |
China best quality low sales price for china supplier hydraulic motor M+Shydraulic motor sauer EPGhydraulic motor Eaton J series Factory Manufacturer and Supplier -from Pto-shaft.com
EPG Machinery is positioned in XiHu Region HangZhou Zhejiang ,China. It is 30km from our manufacturing unit to HangZhou international airport.
Overview
Swift Particulars
- Right after Guarantee Support:
-
Video technical assist
- Regional Services Location:
-
Egypt
- Showroom Area:
-
Egypt
- Variety:
-
components
- Following-revenue Provider Supplied:
-
Video complex assist
EPT Ability
- EPT Capability:
- 500000 Piece/Items per Calendar year
Packaging & Shipping and delivery
- Packaging Particulars
- Carton or Plywood scenario
- Port
- NINGBO/SHANGHAI. CHINA
-
Direct Time
: -
Quantity(Luggage) 1 – fifty >50 Est. Time(days) 15 To be negotiated
On-line Customization
Variety | BMM-eight | BMM-12.5 | BMM-20 | BMM-32 | BMM-forty | BMM-50 | |
Displcement (ml/r) |
8.two | twelve.nine | 19.9 | 31.6 | 39.eight | fifty.3 | |
Max.Stress. Drop (Mpa) |
cont. | 10 | 10 | 10 | 10 | 9 | 7 |
int. | fourteen | 14 | fourteen | fourteen | fourteen | fourteen | |
peak. | twenty | twenty | twenty | 16 | sixteen | 16 | |
Max. torque (N.Mm) |
cont. | 11 | 16 | 25 | forty | forty five | 46 |
int. | fifteen | 23 | 35 | 57 | 70 | 88 | |
peak. | 21 | 33 | 51 | 64 | eighty two | 100 | |
Max. Speed (cont.)(r/min) |
1950 | 1550 | 1005 | 630 | 500 | 395 | |
Max. Flow (cont.)(L/min) |
16 | twenty | 20 | twenty | 20 | 20 | |
Max. Output. Power (cont.)(Kw) |
one.8 | two.four | two.four | 2.four | two.2 | 1.eight | |
Fat(kg) | one.9 | 2 | two.1 | two.two | two.3 | 2.4 |
EPG – As one particular of the biggest machinery transmission and agricultural element and gear manufacturing unit in China, we will provide your high quality goods with lowest price tag. We update new merchandise month-to-month from pto-shaft.com
china manufacturer exporter supplier hydraulic gear motorsmall hydraulic motors priceshydraulic orbital motor
EPG has been productively accredited by ISO9002 High quality Management Technique, ISO9001 High quality Administration Technique, API certification, ISO/TS16949:2002 and ISO10012 measurement management system.
Overview
Rapid Particulars
- After Warranty Service:
-
Online video technical help
- Nearby Service Location:
-
Egypt
- Showroom Spot:
-
Egypt
- Sort:
-
elements
- Soon after-revenue Services Presented:
-
Movie complex assistance
Provide Potential
- Offer Ability:
- 20000 Piece/Items per Month
Packaging & Supply
- Packaging Information
- Carton or Plywood situation or PALLET
- Port
- Ningbo/Shanghai
On the web Customization
Wholesale goods china axial bearing ability hydraulic orbital motor
Product Description
Orbit hydraulic motor
Interchangable with Char-lynn H and S sequence.
forty years manufacturing experiences
Export to wolrd industry
one. This sequence of motor, with its shell made of ductile solid iron of ample intensity, can be utilized to conditions with much less load and interval operation, broadly to agriculture, forestry, plastics, equipment resources and minmachines, these kinds of as the mould height adjustment of the injection molding device, the cleaner, the saw, the worktable and many others.
2. The output shaft, with the deep groove ball bearing, can bear specified axial force and radial drive.
3. With the axial oil distribution structur, it is of scaled-down size and much less weight.
4. With two interior verify valves, no drain connection.
5. With cycoid team with the roller, it has a little friction and hygh mechanical efficiency.
6. BMR collection is equivalent to Charlynn “H” and “S” type, and also can substitute for White, Parker, Eaton.
Kind | BMR-50 | BMR-80 | BMR-100 | BMR-one hundred twenty five | BMR-a hundred and sixty | BMR-two hundred | BMR-250 | BMR-315 | BMR-four hundred | |
Displacement(ml/r) | fifty one.seven | eighty.5 | a hundred.five | 126.three | one hundred sixty.8 | 200.9 | 252.6 | 321.five | 401.nine | |
Max.Pressure.Fall(Mpa) | cont. | fourteen | 14 | fourteen | 14 | 14 | fourteen | eleven | 9 | 7 |
int. | 17.5 | 17.5 | seventeen.five | 17.5 | seventeen.5 | seventeen.five | 14 | eleven | 9 | |
peak. | 20 | twenty | 20 | twenty | 20 | 20 | 16 | 13 | eleven | |
Max.torque(N.m) | cont. | ninety three | 152 | 194 | 237 | 310 | 369 | 380 | 380 | 380 |
int. | 118 | 189 | 236 | 296 | 378 | 450 | 470 | 470 | 470 | |
peak. | 135 | 216 | 270 | 338 | 433 | 509 | 540 | 540 | 540 | |
Pace.Assortment(cont.)(r/min) | 10-775 | ten-750 | 10-600 | 9-475 | 7-375 | 5-300 | 5-240 | 5-one hundred ninety | five-one hundred sixty | |
Max.Circulation(cont.)(L/min) | 40 | 60 | 60 | sixty | 60 | sixty | 60 | sixty | sixty | |
Max.Output.Electricity(cont.)(Kw) | seven | ten | ten | ten | ten | eight | six | 5 | four | |
Weight(kg) | 6.five | 6.nine | seven | 7.three | 7.five | 8 | 8.5 | 9 | 11 |
A lot more Items
Packaging & Shipping and delivery
Company Information
FAQ
Our Services
Contact Us