Tag Archives: esco gear coupling

Carbon China in Mesa United States esco gear coupling manufacturer Steel in Banjarmas in Indonesia gear tooth coupling supplier V Belt Pulley Taper Lock Bush with top quality lowest price

Carbon  China  in   Mesa United States   esco gear coupling  manufacturer  Steel  in   Banjarmas in Indonesia   gear tooth coupling  supplier  V Belt Pulley Taper Lock Bush with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

EPT Taper Lock Bush

The Taper Lock bush is a locking mechanism commonly used in Power Transmission Drives for locating pulleys, sprockets, and couplings to shafts. The Taper Lock bush is pre-bored and keyed to match the required shaft and keyway diameters. The outside of the bush is tapered to match the component bore that is to be located on the shaft.
 
EPT Taper bushes is manufactured from precision cast iron or carbon steel C45 with high quality finish. They are widely used to fit into Sheaves, Sprockets, Pins, V-belt Pulleys and Timing Pulleys.
 
Features: 
·         No need for re machining.
·         No corrosion between bore and shaft.
·         Easy-On/Easy-Off
·         Material in Steel and cast iron are available
 
Types of Taper Bushings are available:
·         ANSI Split Taper Bushings
·         ANSI Taper Bore Bushings
·         ANSI QD Bushings
 
1008, 1108, 1210, 1215, 1310, 1610, 1615, 2012, 2517, 2525, 3571, 3030, 3535, 4040, 4545, 5050

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Carbon  China  in   Mesa United States   esco gear coupling  manufacturer  Steel  in   Banjarmas in Indonesia   gear tooth coupling  supplier  V Belt Pulley Taper Lock Bush with top quality lowest price

Cimc China in Los Angeles United States fenner grid coupling sales Tri-Axle in Natal Brazil esco gear coupling supplier Flour Tank Semi Trailer with top quality lowest price

Cimc  China  in   Los Angeles United States   fenner grid coupling sales  Tri-Axle  in   Natal Brazil   esco gear coupling  supplier  Flour Tank Semi Trailer with top quality lowest price

We – EPG Team the biggest couplings and gears factory in China with 5 different branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

All CIMC cars are customizable, welcome inquiry!!!

Type: Air Discharge Tanker For Carrying Cement
Model: CIMC9402GSN
DIMENSION:
Overall Length : 1,625 mm
Overall Width : 2,500 mm
Overall Height : 3,990 mm
Landing Leg Setting : 2,4two0 mm
Wheelspan : 565mm
Axle Spacing : 1,3one0 mm
King Pin Plate Height : one425mm
TANK:
Tank Volume : 42,000 L(fifty.4ton)
Tank shell :   carbon steel, t=3.5mm/t=4mm thickness 
Dished ends : four.fivemm thickness
Pipe material : Carbon steel
Discharging Hose Diameter : 4″
Discharging valve 4″ butterfly valve
Discharging Hose Length : 7,000 mm
Hose quick coupling : 4″ female quick coupling.
Fluidizer :  Aeration pad with air bag.
Discharging capacity : 1m3/min
Working pressure : 0.2 Mpa
Test pressure : 0.3 Mpa
Manhole : Two.
MAX. Horizontal Discharging Distance: 5,000 mm
MAX. Vertical Discharging Distance 15,000 mm
 
RUNNING GEAR:
Suspension : Undermount tri-axle suspension with equalizer
seven-Leaf Spring.
Axle : FUWA Square axle,13T capacity,three pcs.
Brake : Dual line pneumatic brake system without ABS.
Parking Brake : Type 30/30 spring brake system on every single axle.
Wheel : 9.-2two.5,10 holes steel Disc wheel, 12pcs. Made in china
Tire : 12R2two.5,  12pcs,  tubeless tyre, made in china 
King Pin : three.5” welding type.
LXIHU (WEST LAKE) DIS. LEG: Two speed manual operation type with sand shoe.
Lifting Capacity : 2five,000 kg
Static Load Capacity : 80,000 kg
 
PNEUMATIC SYSTEM:
Electromotor : Huafeng ZHBP1 24V Made in China
Air Compressor : 10m3/min Made in China
Mounted at the front of trailer,
ELECTRICAL:
Voltage : 24 Volt.
Receptacle : 7 way
Light-weight: Front Marker Lamp : White
Side Marker Lamp : Amber
Rear Lamp : Red
Turn Signal Lamp : Amber
 
STRUCTURAL WEIGHT RATING:
Tare Weight : nine,300 Kg.
Pay Load :50,four00 Kg.
G.V.W.R. : 59,700 Kg.
Portray:
The tanker’s color is as per your requirement.
The side guard is red and white.
Contact                                                                        
Mr. Allen
Mobile : +86 151 5082 2016

35M3 cement tank semi trailer
General Description  
Vehicle Name  Bulk Powder/Cement Tank Semi-trailer
Vehicle Brand  CIMC
Vehicle Model CIMC9390GSN
Overall Dimension(mm) 1571,9800x2500x3995
Gross Weight(kg) 38900
Rated Payload(kg) 27500
Curb Weight(kg) 11400
Fifth Wheel Load Approx.(kg) 16000
Running Gear
Axle  3x13tons FUWA axle,Model can be choosed
Wheelbase(mm) 5520+1310+1310
Landing Legs BAOHUA landing leg,Manufacturer can be choosed
King Pin BAOHUA 2inch or 3.5inch,Brand can be choosed
Tyre No. twelve
Tyre Specification eleven.00R22.5 16PR/11.00R20 12PR,eleven.00-twenty 12PR,12R22.5 12PR
Spring Leaf No. /ten/ten/10
Axle Load(kg) -/24000(parallel installed)
Electric System  
24V electric system, electrical socket for lighting,rear lamp for parking, direction,fog,
reverse and 4 side lights.
Tank Body  
Tank Shape cylindrical
Total Volume 58,000ltrs~sixty,000ltrs
Tank Material Hight quality carbon steel,4mm
Tank Thickness 4mm
Suspension type Common mechanical
Compartments Compartment optional.(normal only 1)
Manhole Inner Clasping Variety or A Form Exterior Pressing Kind
Necessary Accessories Top access ladder,anti-slip walkway and foldable handrail,
spare wheel carrier,discharge hose, reflective stickers
Air Compressor
Brand  Chinese famous brand
Discharge Speed one.~one.3tons/min
Discharge Height >25M
Diesel Engine
Brand name WeiChai

Far more pictures for your reference:

 

Company information

CIMC VEHICLES SALES CO., LTD.

CIMC VECHICLE was founded by CIMC group, which fixes the mission to be customers’ partner for modern transportation. CIMC is dedicated to manufacturing and supplying CIMC trucks, CIMC truck body assembly, trailers, tank equipment. Currently, CIMC owns USD 8.8 billion total assets, USD 2.6 billion net assets, USD 8.4 billion annual sales and USD 0.6 billion net profits in 2571, having over 150 subsidiaries and 63, 000 staff across China, North America, Europe, Asia and Australia.

Automobiles: CIMC has over 1000 lines of products in 11 series, including container chassis, flatbed trailer, bulk lorry, tanker, self-dumper, reefer trailer, van, curtain side trailer, mixer, pump truck, car carrier vehicle, fire engine, sanitation vehicle, etc. With the annual output capacity of over 200 thousand units, it now takes the leading position in the world. Up to today, the Group has established 22 production bases.

Heavy Truck: Have its own production C & C brand truck. Other heavy truck CIMC produces the truck body, more than 2, 000 kinds of truck body for different transportation purpose. The truck chassis cooperates with FAW, XIHU (WEST LAKE) DIS.FENG DFAC, SHACMAN, SINOTRUK, FOTON, BEI BEN, JAC, CAMC, SI CHUAN HYUNDAI, SAIC-Iveco and so on, include all truck chassis brand production in China.

Welcome global heavy truck dealer to take a sight seeing of trucks, to taste values of “considerate service, benefits share”! Will bring you cost-saving solutions and eye-catching returns!

Contact information

CIMC VEHICLES SALES CO., LTD.
Deal with: 8floor, Cimc Plaza, No. 10 West HangZhou Rd, HangZhou, ZheJiang , China
Web site:yzcimc.en.created-in-china.com

Tel:86 – 514 – 8282 6119
Fax: 0086-571-88220971:86 -514-8732 5750
Cell :86-151-5082-2016 (Mr.Allen)

/ The use of original gear manufacturer’s (OEM) part numbers or logos , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the outlined EPT parts contained herein are not sponsored, accredited, or made by the OEM. /

Cimc  China  in   Los Angeles United States   fenner grid coupling sales  Tri-Axle  in   Natal Brazil   esco gear coupling  supplier  Flour Tank Semi Trailer with top quality lowest price

High China in Baghdad Iraq esco gear coupling Efficiency in Raurkela India motor and gearbox coupling near me shop High Pressure Roots Blower with top quality lowest price

High  China  in   Baghdad Iraq   esco gear coupling Efficiency  in   Raurkela India   motor and gearbox coupling  near me shop  High Pressure Roots Blower  with top quality lowest price

We – EPG Team the greatest couplings and gears manufacturing facility in China with 5 distinct branches. For much more information: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828 /

We make all kinds of roots blower, centrifugal blower, Our Primary merchandise are as under:

Type Diameter Rate of movement Pressure
ESR-MJ(Intensive Kind) Φ50~Φ300mm .5~140m³/min 9.8KPa~98.8Kpa
ESR(Ordinary Kind) Φ50~Φ350mm .5~140m³/min nine.8KPa~78.4Kpa
ESR-H(Large-force Variety) Φ50~Φ350mm .seven~160m³/min 58.8KPa~98.8Kpa
ESR-V(Vacuum Pump) Φ50~Φ350mm .five~160m³/min 9.8KPa~fifty three.3Kpa
EL Series Φ200~Φ600mm 20.three~750m³/min 9.8KPa~fifty eight.8Kpa
Multistage Centrifugal Blower
or C-Sequence
Φ250~Φ500mm 50~500m³/min nine.8KPa~98Kpa
ERR-ERG Sort Φ250~Φ500mm a hundred and twenty~420m³/min 9.8KPa~98.8Kpa

The operating principle of the 3-blade roots blower: two 3-lobed rotors are organized in the cavity, and the
suction port and the discharge port are opened on each sides of the cavity. By way of the action of a pair of
synchronous gears, the two rotors rotate in reverse directions and Relying on the mutual engagement of the two
rotors, the suction port and the discharge port are isolated, and the gasoline in the chamber is pushed to accomplish the
goal of blowing.

Attribute of our roots blower:
one. Huge adjustment of the air volume
2. Minimal Sound
three. Higher effectiveness
4. Low energy cosumption
5. Prolonged time existence
6. Trustworthy running, straightforward maintenance,little footprint

The parameters of our roots blower:

Variety Ratary Velocity
(r/min)
Strain Increase
(Kpa)
Capability
(m/min)
Shaft Electrical power
(Kw)
Motor Device Maximn
Weight(Kg)
Electrical power
(Kw)
ESR-50 1100-2120 9.eight-58.eight .sixty five-2.fifty eight .three-3.54 .75-four 128-158
ESR-sixty five 1100-2130 nine.eight-58.eight .94-three.66 .38-4.46 .75-five.5 a hundred and fifty five-185
ESR-eighty 1140-1900 nine.eight-fifty eight.eight two.34-5.forty three 1.04-7.42 2.2-11 155-277
ESR-one hundred 1060-1980 9.8-58.8 4.57-nine.05 1.35-12.fifteen 3-15 309-377
ESR-one hundred twenty five 980-1850 9.8-fifty eight.8 five.35-twelve.4 1.sixty five-5.19 five.5-18.five 408-451
ESR-125C 970-1830 9.8-fifty eight.eight seven.5-17.57 3.2-eighteen.five 4-22 408-451
ESR-150 810-1730 nine.eight-fifty eight.8 10.37-27.fifteen three.eighty four-forty.eighty two 7.five-45 688-848
ESR-one hundred seventy five 970-1520 9.eight-fifty eight.eight 19.65-36.65 7.2-45.ninety five eleven-55 980-1080
ESR-200B 740-1450 nine.eight-58.8 19.sixty five-forty four.8 10.15-60.forty four 15-seventy five 1272-1546
ESR-two hundred 810-1480 9.8-58.8 27.sixty five-59.two 8.05-eighty,12 fifteen-ninety 1272-1546
ESR-250B 1100-1480 nine.8-fifty eight.8 fifty four.77-77.fifty five 19.ninety seven-ninety.97 thirty-one hundred ten 1490-2454
ESR-250 990-1480 9.8-fifty eight.8 61.4-97.52 20.one-117.three 30-132 1490-2454
ESR-three hundred 990-1480 9.eight-58.8 87.one-138.one 26.four-167.8 37-185 3326-3446
ESR-350 730-1480 9.8-58.8 seventy eight.41-177.31   fifty five-250  
ESR-50H 1230-2120 63.seven-ninety eight .45-two.02 two.05-six.12 3-7.5 a hundred and sixty–a hundred and seventy
ESR-65H 1240-2130 sixty three.seven-98 .78-2.53 two.89-7.fifty five four-eleven 198-230
ESR-80H 1140-1900 sixty three.seven-ninety eight one.82-4.fifty five 4.09-ten.one 5.five-15 316-326
ESR-100H 1060-1980 63.seven-98 two.sixty five-eight.06 6.36-17.2 7.5-22 398-459
ESR-125H 980-1850 sixty three.seven-98 four.64-11.23 8.ninety two-24.two eleven-thirty 544-630
ESR-150H 810-1730 63.7-98 9.53-25.seventy six 17.sixteen-65 18.5-75 752-1571
ESR-200H 810-1480 63.seven-98 twenty five.34-56.ninety two forty two.34-120 fifty five-132 1426-1934
ESR-250H 990-1480 sixty three.7-ninety eight 58-ninety three.seven eighty three.two-205 ninety-220 2980-3468
ESR300H 990-1480 sixty three.7-98 86.nine-134.1 114.seven-270 132-280 3476-3998
ERF-245 650-980 9.8-98 forty seven.5-97.4 16-183 18.five-200 3630-3690
ERF-250 650-980 nine.8-98 61.six-one hundred twenty.4 19-227 22-250 4450-4500
ERF-290 650-980 nine.8-78.4 ninety two.3-128 22-213 30-250 4890-4710
ERF-295 650-980 nine.8-seventy eight.four ninety seven.3-152.five 23-227 thirty-250 4890-4880
ERF-297 650-980 nine.8-78.four 87.5-167.six 26-249 30-280 5330-5520
ERF-three hundred 650-980 9.eight-seventy eight.four 101.5-188.seven 29-278 37-315 5330-5520
ERF-350 650-980 nine.8-78.4 126-224.nine 34-249 45-280 5210-6470
ERG-three hundred 590-730 nine.8-98 128.three-196 38-362 forty five-four hundred 9440-15710
ERG-350 590-730 9.8-98 159.three-231.six 43-420 55-450 9700-1571
ERG-400 590-730 9.8-83.three 203.1-290.9 fifty two-449 seventy five-five hundred 10090-11390
ERG-445 590-730 nine.eight-seventy three.5 229.seven-327.eight fifty eight-477 seventy five-560 10600-12230
ERG-450 590-730 nine.eight-73.5 262.4-366.two 64-496 75-560 10600-12230
ERG-500 590-730 9.8-sixty three.7 327.four-452.4 78-529 90-560 12790-14620
ERF-240-V 650-980 -9.eight- -forty nine 38.1-seventy eight 13-76 18.five-ninety 3420-3285
ERF-245-V 650-980 -nine.eight- -forty nine 47.five-97.four 16-ninety five 22-one hundred ten 3425-3360
ERF-250-V 650-980 -nine.8- -49 sixty three-a hundred and twenty 19-117 22-132 3910-3830
ERF-290-V 650-980 -9.8- -forty nine 72.6-144 22-136 thirty-160 4415-4270
ERF-295-V 650-980 -nine.eight- -49 76.six-152 23-145 thirty-one hundred sixty 4425-4485
ERF-297-V 650-980 -nine.8- -49 84.3-166.eight 26-one hundred sixty 30-one hundred eighty 5000-4980
ERF-300-V 650-980 -9.eight- -49 97-192 29-178 37-200 5000-4980
ERF-350-V 650-980 -nine.eight- -forty nine 116-225 34-209 forty five-250 5400-5700
ERG-300V 590-730 -nine.eight- -49 133-193 38-184 forty five-220 7800-9100
ERG-350V 590-730 -9.eight- -49 163-231 43-216 55-250 9500-9470
ERG-400V 590-730 -nine.eight- -forty nine 199-290 fifty two-269 75-315 9900-10130
ERG-445V 590-730 -nine.eight- -forty nine 224.eight-326.nine 58-303 75-355 9900-10130
ERG-450V 590-730 -9.8- -49 255-365 sixty four-335 75-four hundred 11230-11300
ERG-500V 590-730 -9.eight- -49 314-452 seventy eight-412 132-450 13630-13850
ERF-245W 650-980 -thirteen.3- -fifty three.three 53.five-one zero one 21.5-102 30-a hundred and ten 3630-3360
ERF-250W 650-980 -thirteen.3- -53.3 sixty nine-127 26.five-127 30-160 3985-4115
ERF-290W 650-980 -13.3- -fifty three.three 82.6-a hundred and fifty 30.five-149 37-185 4340-4580
ERF-295W 650-980 -13.three- -fifty three.three 87-158 32-158 37-185 4440-4580
ERF-297W 650-980 -13.three- -fifty three.three ninety five-174 36-174 forty five-two hundred 5230-5130
ERF-300W 650-980 -13.three- -fifty three.3 109-195 forty-193 fifty five-220 5230-5130
ERF-350W 650-980 -13.3- -fifty three.3 129-230 50-230 seventy five-250 5840-5670
ERG-300W 590-730 -13.3- -53.three 142-197 fifty two-201 seventy five-220 9100-9000
ERF-350W 590-730 -13.3- -53.three 168-234.4 59-235.five 75-280 9500-9600
ERG-400W 590-730 -thirteen.3- -fifty three.three 220-276.6 71-292 90-315 9900-10130
ERG-445W 590-730 -13.three- -fifty three.3 244-294.six eighty two-331 90-400 11230-11300
ERG450W 590-730 -thirteen.3- -53.3 275-368.five ninety one-366 110-400 11230-11300
ETRF-250
(240,250)
650-980 98-196 64.eight-112 one hundred thirty five-355 a hundred and sixty-400 8700-8600
ETRF-295
(245,295)
650-980 ninety eight-196 80.eight-139 167-439 185-five hundred 9200-9100
ETRF-three hundred
(245,295)
650-980 ninety eight-176.four 102-174 206-497 250-560 10320-10500
ETRF-350
(245,295)
650-980 ninety eight-137.2 124-207 241-473 280-560 10700-11110
ETRG-400
(three hundred,four hundred)
590-740 ninety eight-176.4 205-273 380-773 450-900 21350-24200
ETRG-450
(350,450)
590-740 98-176.4 263-428 476-955 560-1000 24200-27600
ETRF-250W
(240,250)
650-980 -53.3–eighty 72-121 75.6-121 90-a hundred and sixty 6100-6470
ETRF-295W
(245/295)
650-980 -fifty three.3–eighty 93.8-154 99.5-186 110-220 7000-6400
ETRF-300W
(2505/three hundred)
650-980 -53.3–eighty 116-189 one hundred fifteen-220 132-250 7750-7760
EL81WD 580-980 9.eight-58.eight 54.two-130 eighteen-151 forty five-185 3595
EL82WDB 580-980 9.8-58.8 seventy two.eight-161 22-191 forty five-220 3860
EL83WDA 580-980 nine.eight-fifty eight.nine one hundred and one-213 28.5-202 forty five-220 4300
EL84WDA 580-980 nine.8-58.8 129-267 35.4-252 forty five-280 4720
EL93WDA 580-730 nine.eight-49 230-329 56.four-311 seventy five-355 7765
EL94WDA 580-730 9.8-49 263-373 64-353 75-four hundred 8130
EL95WDA 490-580 9.eight-fifty eight.eight 308-434 81.4-414 90-450 11500
EL96WDA 580 fifty eight.eight 381 497 560 11500
E397WN 1000-1650 40 5-9      
E408WN 870-1650 forty ten-22      
E517WN 980-1580 40 twenty-thirty      
E520WN 930-1550 forty 24-forty five      
E607WN 750-1250 40 45-76      
E610WN 750-1250 40 seventy five-130      

Spare elements and structure of our roots blower:

Package of our Roots Blower

Pack into iron circumstance, two layer,blower human body and motor in reduce layer, inlet/out silencer and many others in upper layer

Roots blower pack method exact same as iron situation, just modify to Fumigation Free Plywood Scenario

Our factory is a specialist manufacturer of Roots blowers which has above twenty years’ experience in machinery
producing. It is situated in Xihu (West Lake) Dis. East Industrial Park, 50 kilometers to the east of Shan EPT provincial
funds— HangZhou. Our business also has handy site visitors transportation, as it is fifteen kilometers absent from
Diaozhen City station of HangZhou-HangZhou expressway, and thirty kilometers absent from East HangZhou station of
ZheJiang -ZheJiang expressway.The leading merchandise of our firm is ESR -kind Roots Blower. The roots
vacuum pump is a new type of substantial-performance roots blower, which is developed independently based on the
domestic and international sophisticated technologies. Several patented technologies have been adopted on Roots
Blower, and as a result we have made important outcomes in energy conservation and noise reduction, and many others.. So considerably, our
firm has invested a lot more than 30,000,000 RMB to introduce such sophisticated professional equipment as
horizontal machining centre, vertical machining heart, two-way CNC floor planer, CNC lathe, CNC milling
equipment, CNC planer, plane grinder, cylindrical grinding equipment, and 3 coordinates tests device.
Besides, we have taken various measures to standardize the process circulation this kind of as functioning and cooperating
with many scientific research units, schools and universities at property and overseas. We also constantly attempt to
absorb and boost the domestic sophisticated creation technologies, so as to advertise the upgrading and
optimization of the item and make the merchandise quality get to the superior amount at home and overseas.
ESR -type Roots Blower includes many sequence this kind of as A few-leaves Variety, Two-leaves Type and Centrifugal
Type,which can be more divided to hundreds of kinds. The merchandise are commonly utilised in sewage therapy,
pneumatic conveying,vacuum packaging, aquaculture, foodstuff processing, EPT electrical power, petrochemical, cement,
mining and other industries. Our merchandise have such positive aspects as minimal sound, power preserving, steady quality,
and lengthy services life, and many others.. With the revenue outlets throughout the domestic capital towns, our items offer effectively all
over the region, and have been exported to North America,Russia, Malaysia, Indonesia, Vietnam, South Africa
and some other countries. Having got the ISO9001 International Top quality System Certification, we have
established and improved the high quality assurance of the products developing, production, and set up.
From the method of style, investigation and advancement to the completed goods, we have got the total
process managed independently, therefore supplying the complete basis and dependability ensure for the items steadiness
and sturdiness. Having a perfect income network and right after-product sales service, we give our consumers with greater-
good quality and a lot more productive services.All staff of our firm sincerely welcome the broad masses of friends to
information, and negotiate business with us.

Our Roots Blower Workshop

         Doosn Horzitonal Device Middle

The Software of the Roots Blower

Upkeep and inspection
(1) Examine all fasteners and finding pins circumstances regardless of whether they are loosening.
(two) Always verify no matter whether the leakage phenomenon of the physique.
(three) Spend focus to lubrication, quantity of grease and noises when working,
decide whether it works beneath the needed circumstances.
(4) Lubricant & grease: The lubricant is for medium load industrial equipment oil
(quality 220, kinematic viscosity of 198 ~ 242mm2 / s 40ºC, flash level ≥ 200ºC)
The grease is butter (synthetic lithium grease penetration 220-250, drop stage ≥
190ºC). Exchange the lubricant and grease soon after very first two hundred several hours operating, and change
once again after a moth working. Afterwards, exchange the lubricant and grease in accordance to the
environment and lubricant (grease) high quality suggest a appropriate EPT for a few
months.
(five) Often check the inlet air filter, thoroughly clean or change the filter in time.
(6) Blower overload at times not quickly exhibited, so spend attention to
the consumption and exhaust force, bearing temperature and the current boost traits
of motor to figure out regardless of whether the blower works generally
(seven) Prior to disassembling the blower, the assembling relation and dimensions
should be recorded or calculated, make marks on elements to make sure the unique
specifications soon after assembling.
(8) When freshly device or overhaul, the oil tank must be cleaned just before use
and propose change all grease right after eight hrs working.

Widespread failure purpose and troubleshooting

No Failure Possible causes Elimination techniques
1 Friction
among the
impeller
(1) Impurities on the impeller,
ensuing in the gap is too tiny
(2) Equipment dress in, resulting in a
big backlash
(3) The equipment is not effectively mounted,
can not preserve the impeller
synchronization
(4) Bearing dress in ensuing in
clearance increasing.
(one) Take away dust and check
no matter whether there is hurt elements
(2) Modify the gear hole, substitute
the gears if the gear backlash is
better than the typical 30% to
50%
(3)Re-assemble the gears, maintain
the taper speak to location is to seventy five%
(four)Change the bearing
2 Collision
in between
impeller and
wall, the
impeller leading
and casing
(1) Installation gap is not right
(2) running force is also
large, exceeding the specified
value
(3) Functioning temperature is also high
(4) Casing or foundation deformation,
positioning fan failure
(5) Bearing axial location is not good
(one) Alter the hole
(2) Recognize brings about of
overloading, reduced the force
to the specified worth
(three) Verify the set up
accuracy and decrease the pipe
tension
(four) Check out and repair bearings,
and to make certain the clearance
(5)Relocation
3 Temperature
way too high
(1) Oil in tank is also a lot, also
thick or as well filthy
(2) Filter or silencer is blocked
(three)The strain is higher than
the specified value
(4)Excessive dress in of the
impeller, big gap
(five)Bad air flow, indoor
temperature is higher, resulting in
inlet air’s large temperature
(six) The rotating speed is also low,consequence in the belt slipping.
(1)Decrease the oil amount or rely on
oil
(two)Eliminate of blocking objects
(three)Lowering the strain through
the blower
(4)Fix its clearance
(5)Open up vents to minimize space
temperature
(six) Increase pace to stop the
belt slipping.
4 Insufficient
stream
(one) The inlet filter is blocked
(2) Impeller dress in and the gap
boosts as well significantly
(three) Belt slipping
(four) Huge imports pressure loss
(5) Pipeline ventilation leakage
(one) Clear the filter dust and
obstruction
(2) Repair the hole
(3)Tighten the belt and boost
the number of belts
(4)Alter the inlet force to the
specified price
(five) Check out and repair the pipeline
5 Oil leaking or
oil leaking
into the enclosure
(one)Substantial tank position lead to
leakage from the discharge port
(two) Seal wear, resulting in shaft oil spills
(3) The force is larger than
the specified price

 
(1)Minimize the oil amount
(two)Change the seals
(three)Clear the air vents, 2mm diameter faucet is set in the
middle chamber, open up the faucet
underneath the wall
6 Irregular
vibration and
sounds
(1)Bearing clearance exceeds the
specified worth or bearing dress in
(2) The equipment backlash is also
large, not in a limited fastened
(three) The international objects and dust
brought on by the impeller and the
impeller, the impeller and the
housing collision
(four) the impeller shaft
deformation brought on the collision
caused by overload,
(5) Friction amongst the impeller
and the inlet housing triggered by
overheating
(six) Unbalance of the impeller
caused by fouling or international
physique
(seven) Anchor bolts or other
fasteners are loosened
(1)Change bearings or bearing
seat
(2)Reassemble equipment and make sure
backlash
(three)Cleansing blower, check out the
situation is broken
(four)Check the back again pressure, check
the wheel and modify hole
(5)Verify the filter and again
strain, improve the hole
amongst the impeller inlet and the
casing
(six)Thoroughly clean the impeller and the
casing, to guarantee that the impeller
clearance work
(7) Tighten the anchor bolts and
leveling the base.
7 Motor
overload
(one)In comparison with the needed
stress, the force variation
is massive that the back strain or
the inlet stress is high
(two) In comparison with the
products specifications, blower
circulation is as well huge, so its force
boosts
(3)Inlet filter is blocked, or outlet
pipe is obstructed or blocked
(4) Collusion or friction (trapped)
rotating components
(five) The oil degree is way too substantial
(six) Narrow V-belt is overheat,
vibration is way too massive, or pulley
is also tiny
(one) Reduce the pressure to the
specified benefit
(two) Exhaust the excessive gas into
the ambiance or reduce the
blower pace
(3) Remove the obstructions
(4)Instantly shut down, check out
the purpose
(5) Adjust the oil to the appropriate
degree
(six) Examine the belt tension, and
replaced it with huge diameter
pulley.

Our Services

one. Pre market service                                                                              2. Right after market service                                          
a. recommend the ideal model                                             c. on the web technical assistance,                                                                                   
b. factory tour                                                                              d. total daily life spare components and techinical help

Gurantee

12 months gurantee for our roots blowers
 

/ The use of unique equipment manufacturer’s (OEM) element numbers or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the listed EPT areas contained herein are not sponsored, accredited, or produced by the OEM. /

High  China  in   Baghdad Iraq   esco gear coupling Efficiency  in   Raurkela India   motor and gearbox coupling  near me shop  High Pressure Roots Blower  with top quality lowest price

Good China in The Hague Netherlands esco gear coupling sales Surface in Diyarbakir Turkey face gear coupling sales Hardened Steel Herringbone Gear with top quality lowest price

Good  China  in   The Hague Netherlands   esco gear coupling sales  Surface  in   Diyarbakir Turkey   face gear coupling sales  Hardened Steel Herringbone Gear with top quality lowest price

We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

 

Specifications

– OEM service offered 
– Superior quality at competitive price 
-Customized

We can offer OEM Service for Gear Steel Castings, and those steel castings can be produced in the following conditions:

  • Heat treatment: Normalized, Normalized and Tempered, Quenched and Tempered
  • Machining: Rough machined, Semi-finished machined, Finished machined
  • Non-Destructive Testing: Magnetic Particle Testing, Ultrasonic Testing, Penetrant Testing
  • Material: Carbon Steel, Alloy Steel, meet ASTM, BS, DIN, NF, JIS, ISO standard
  • Individual Weight: 500KG – 140MT 

Technical parameters:

pecification Machining Scope
Outer Diameter 100-5000mm
Hobbing Modulus up tp 40
Milling Modulus up tp 50
Production Methods for the blank Forging, casting
Accuracy Grade OD with 4000mm, 6 grade; 
OD above 4000mm, 8 grade.
Heat treatment annealing or normalization, quenching & tempering
Surface Treatment Grinding & Carburization, nutrition & shotblasting, mid-high quenching on the surface
Teeth Profile Hellical, Spur

Material: Our castings using EPT Arc or Induction Furnace sand Vacuum Degassing (if required) are manufactured to ASTM, AISI, DIN, JIS, SAE or proprietary standards
Quality Control: UT,MT,RT,PT,chemical composition test,mechanical property test,etc.
Heat Treatment: Normalize,Quenching,Tempering,Anealled.
Surface Treatment: painting,plating,polishing,black oxide,transparent anti-rust oil.
Inspection: Besides our in-house inspecion, you could also choose a third party inspection.
Standard: ANSI,ASTM,ASME,API,JIS,DIN,BS,EN,KS,UNI,SABS,GOST.
Certificate:  1, Raw material certificate(material chemical compositon)
                      2, Heat treatment sheet report
                      3, Dimension inspection report
                      4, UT test report
Packing:  Seaworthy plywood packaged on stell pallets or as customer’s request
Delivery Date: Decided by the amount and dimensions of products. Usually we control the large diameter rings’ delivery time within 5 weeks after we receive your formal order.

Forged Bevel Gear

TS16949 certified bevel gears manufacturing starts production from a forging, bar stock, or any other formed product such as a casting, depending on the strength requirements of the finished bevel gear. A forged blank is used when a superior strength to weight ratio, as well as better impact and fatigue resistance is necessary.
Forged bevel gears, cut gears, differentials, transmissions and drive systems. Gear cutting specialties include spur, helical, worm and worm wheel, splined shafts, internal I.D. – O.D. broaching of various sizes. 

Focus
Design and Manufacture of Gearing and Machined Products and Assemblies
Net-forged Bevel Gears
Differentials
Transmissions
Angular Gearboxes
Rapid Prototyping and Market Introduction
Investment in Critical Production Capabilities
Efficient and Focused Engineering and Manufacturing
Commitment to Quality
Intelligent Cost Structure
Markets Served
ATV
Snowmobile
Marine
Construction/Utility
Government
Agriculture
Individual Gears
Gearbox Assemblies
Public Transportation
Logging Industry
Ever-power specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce EPT variators, geared motors, EPT motors and other hydraulic products according to customers’ drawings.
The company provides a reliable gurantee for the product’ s quality by advanced inspection and testing equipment. professional technical team, exquisite processing EPT and strict control system. 
In recent years, the company has been developing rapidly by its rich experience in production, adcanced managemant system, standardized management system, EPT technical force. We always adhere the concept of survial by quality, and decelopment by innovation in science and technology. 
Chinese high precision EPT car parts differential gear 

   Product Name EPT car parts
  Materials Available Steel, aluminum, brass, bronze, copper, plastic, steel alloys, etc.
  Type Services OEM/ODM/Customized/Design
  standard ISO9001:2008/SGS/ROSH
  Surface treatment Sandblast, anodize, galvanization, powder coating, black oxidePolish,
brush, mirror polish, etc.
  process Milling, turning, drilling, wire EDM, welding,  assembly, etc.
  Partners Microsoft, Sodick, HangZhou Airline, etc.
  Carton size 25*20*15CM&30*25*14CM&40*25*15CM&50*50*30CM
  Tolerance +/-0.001mm or +/- 0.00004mm
  Packing 1. inner packaging: PP bag, bubble bag, plastic wrap etc. 
2. outer packaging: carton, wooden case, pallet etc.
3. according to customers’ requirements.
  After sales service  we will follow up goods for every customer and help solve
problem after sales
  Product Name Spur Pinion Gears
  Material    Steel/Stainless Steel/Cooper/Nickel
  Technology Powder Metallurgy – Machining
     Certificate ISO9001/TS16949
  Surface Treatment High Frequency quenching, Oil impregnation
  Unspecified Tolerance ISO 2768 – m / H14, h14, +- IT14/2
  Apperance No Crumbling, Cracks, Exfoliation, Voids, Metal Pitting and Other Defects
   
Process Flow
Powder mixing – Forming – Sintering – Oil impregnation – Sizing -Ultrasonic Cleaning – Steam Oxidation – Oil impregnation – Final inspection – Packing
  Application Industry,Vehicle, Power Tools, Motor, Bicycle, Electrombile
  roduct name internal helical gear
  Material C45,40Cr,20CrMnTi,42CrMo,Copper,Stainless steel and so on as per your requests.
   Processing Forging,Machining,Hobbing,Milling,Shaving, Grinding,Heat treatment…… 
   Heat Treatment Carburizing,Induction,Flame,Nitriding……
   Main Machines Gear Hobbing Machines,Gear Shapers(Gealson,Moude), lathe, gear  Shaving machines, gear millling, gear grinding Machines and  CNC centers….
   Why choose us •100% manufacturer
• Rich production experience
•Advanced GEAR Machine 
•Strict Quality Control System
•Flexible MOQ
•Punctual delivery
•Excellent and Experienced Team
Product Details  
Name custom manufacture drawings cnc machine stainless steel steering gear  
Processing Sand casting, die casting, precision Forging, Investment casting, lost wax casting, Machining and Stamping  
Application 1) pipe fittings, Petroleum, smelting, foodstuff, power, papermaking, chemical, medical equipment,  
2) Aviation, boiler heat, exchanger, gas metallurgy, shipbuilding, construction, etc.  
casting process client drawings , pattern, raw casting, machining, packing and delivery  
Surface treatment plating, anodizing powder coating, spray-paint, electrophoresis  
Material (1)grey iron, ductile iron , pig iron  
(2)carbon steel, stainless steel 304, alloy steel  
(3)aluminum alloy, aluminium, A380, aluminum 6061  
(4)zinc alloy ,copper, brass, bronze etc  
Size available in all sizes or as customer’s drawings  
Standard DIN, AISI, ASTM, BS, JIS, etc  
Certification ISO9001:2008  
Service To chart to sample production; OEM / ODM  
MOQ small order is acceptable  
weight 0.02-30KG  
other details  
packing Standard export package(carton/wooden case/pallet)  
shipping Accept FOB or customer designated shipping agent.  
Delivery Detail 30 days ( after confirmed the order )  
Payment Terms  T/T  
Material 1.Sus:AISI303, AISI304, AISI316F, 420,440,etc.
2.Aluminum: 6061,6063,7075…
3. Plastic : PVC, POM, Nylon etc.
4.Brass:C36000, C37700, Hpb59-1, H62, etc.
 
Services OEM, design, customized al  
Process Type CNC turning, milling, drilling, grinding, wire EDM cutting etc.  
Tolerance 0.01-0.05mm can also be customized  
Dimension: As customers’ request  
Trial sample time:  7-days after confirmation  
 Drawing Format:  PRO/E,  Auto CAD,  Solid Works,IGS,UG, CAD/CAM/CAE  
         

Specification:

Item Spur Gear
Material Iron/Plastic/Rubber/Stainless Steel/Steel
Grade Customized
Size Customized
Gear Type External/Internal/Spur/Helical/Skew/Double /Bevel/Spiral
Gear Shape Customized
Surface Treatment Blackening/Electroplating/Coating/Phosphatizing
Standard ANSI/BS/ISO/DIN/JIS
MOQ  500Pcs
Trade Term FOB HangZhou
Shipping FedEx/UPS/TNT/DHL/Sea/Air Shipping
OEM Service Accept
Package Master Carton
Description EPT durable in use high precision steel Spur Double Gear
  Type OEM
Application Industry Mechanical…
Processing Forging, Pressing…
Material Stainless steel (304/316/630),Carbon Steel, Alloy steel, Aluminium, Copper…
Surface treatments Antirust oil, Plating, Galvanized, Paint, Powder Coating, Polishing, etc…;
Weight Ranges 0.2kg-2000kg
Tolernace According to drawing or standard.
Design Support Pro-E, UG,SolidWorks,AutoCad, PDF…
Quality Control Material Cert, Dimension report,Performance,Detection,Other test
Standard ASTM,DIN,JIS,ISO,EN,GB standards

Gear

Material: 20CrMnTi etc
Surface:   Anti-oil
Feature Long using life and the reasonable price
Package Oil paper+ PLT
Item Name combine harvester gear

 
Bevel Gear

Material:   Powder metallurgy etc
Production Casting
Surface: Anti-oil
Feature Long using life and the reasonable price
Package   CTN+ PLT
Item Name combine harvester gear
roduct Name Steel Double Gears
Material    Steel/Stainless Steel/Cooper/Nickel
Technology Powder Metallurgy – Machining
   Certificate ISO9001/TS16949/SGS
Surface Treatment High Frequency quenching, Oil impregnation
Unspecified Tolerance ISO 2768 – m / H14, h14, +- IT14/2
Apperance No Crumbling, Cracks, Exfoliation, Voids, Metal Pitting and Other Defects
 
Process Flow
Powder mixing – Forming – Sintering – Oil impregnation – Sizing -Ultrasonic Cleaning – Steam Oxidation – Oil impregnation – Final inspection – Packing
Application Industry,Vehicle, Power Tools, Motor, Bicycle, Electrombile

Company introduction

HangZhou EPT Engineering CO.,LTD is a manufacture of bearings, worm drivers, slewing bearings, gears, shaft and engineering parts.   EPT bearings, worm drivers, slewing bearings, gears, shafts prove every day to be important structural and connection elements, they can be widely used in the lifting&transport machinery, mining machinery, construction machinery, port hoisting machinery, port oil transfer equipment, onshore and offshore crane, excavator, concrete machine, paper machine, plastic and rubber machine, weave machine, cement plant, steel plant, EPT power plant, wind power generator, other construction and industry machines or equipment and other large rotary devices.
 The products made by EPT Engineering Co are mainly exported to the countries of the European Union, USA, the Middle East, the South American, the Africa, Austrilian and Asia areas and the Russian Federation, in the process of cooperation with our customers, we have made it a principle to establish a lasting and rewarding partnership with our customers by providing efficient service with the top quality and minimizing the production cost.
 Xihu (West Lake) Dis.g for consistent commitment to the quality of products and customer service, EPT Engineering attaches great importance to research and development to ensure better product quality and service from its establishment. The quality of EPT products are based on the excellent specialist and technical level of constructors and technicians, highly qualified operators, experiences production workers.
 
 
The company name:  HangZhou EPT Engineering Co.,ltd
Address: No 3 Lianmeng Road, Xihu (West Lake) Dis. Area, HangZhou City, ZheJiang Province, China
Tel:  0086~571-8822571/88220973-64516701
Fax: 0086~571-8822571/88220973-8822571; 0086~571-8822571/88220973-64516702
 
Website:  
 

 

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/

Good  China  in   The Hague Netherlands   esco gear coupling sales  Surface  in   Diyarbakir Turkey   face gear coupling sales  Hardened Steel Herringbone Gear with top quality lowest price

Torque China in Lilongwe Malawi esco gear coupling near me shop Limiters with top quality lowest price

Torque  China  in   Lilongwe Malawi   esco gear coupling  near me shop  Limiters with top quality lowest price

We – EPG Team the largest couplings and gears manufacturing unit in China with five distinct branches. For a lot more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828 /

  if you are interested in our new catalogue of year 2019,
pls write to me so that I can send you for your reference by wetransfer.
Keylss Locking Products:
one. EPT are building and generating lock units, wind electricity locks.and new energy autos locking couplings according to EURO.United states of america.GB/J B specifications. We are a single of the primary suppliers of German, American,and Japanese marketplace, we have a prolonged and regular cooperation with German and Japanese consumers,in the meantime, we gained recognition from our German customers since of our very good good quality.
2. For lock system, there are more than forty sequence, and a lot more than 3000 objects(from 4MM-5MM). like non-common collection, stainless steel sequence, nickel plated sequence,chromed collection, zinc plated series, black sequence, and and many others.
three. EPT can specifically design solution with our laptop simulation software program. We have our own torque tests tools which created by ourselves. The products can check a torque from .two to one.five million N.M.
four. Reputable heat-treatment and materials crack detection are utilizing to avoid crack or deviation. Grade twelve.nine advanced screws which are prolonged-expression utilized in throughout the world precision device instruments,wind electrical power, heavy device,and this sort of other industries are also utilizing in our firm.
The business has provided services for many popular interior compaines, such as: Newamstar Co.,Ltd, ZheJiang Amstar Beverage Machinery Co., Ltd., HangZhou Wahaha Group Co., Ltd., ZheJiang Yili Industrial Group Co., Ltd., ZheJiang Meng Niu Dairy (Team) Co., Ltd., Yurun Group, Cocacola,Nestle, TSINGTAO Brewerv Co.,Ltd., SUNTORY, East EPT oils & grains industries (HangZhou) Co.,Ltd., Kerry oils& grains (HangZhou) Co. Ltd., HangZhou pharmaceutical group holding co.,Ltd., etc.
With our many years of experence, high quality goods, superb services we work with world wide clients from The usa, Europe, Africa, several counrties of Asia. We keep very good enterprise relation with them, and get reliable from them.
Our merchandise application:
Packaging and conveying business
Beverage bottling and dealing with sector
Foods and meat processing business
Chemical market
Prescription drugs business
Car sector
EPT and electronics market
Textile industry
Mild engineering sector
EPT major items: alloy metal roller chain, conveyor chain, agricultural chain, elevator chain, stainless steel chain, car chain, sprocket, Plastic Chain Belt, Engineered Plastics Chain Xihu (West Lake) Dis., Snow Chain, Saw chain, Lifting Chain, Locking devices, Timing pulleys, Synchronous Belt, V-Belt pulleys, Couplings, Rack&Equipment, Mounted Ball Bearing Units, Bearings, Reducer&Motor, bolts.
Items supplied by EPT are widely utilised in railway, mine, oil, equipment, metallurgy, paper producing, textile, printing and dyeing, electrical power, device, chemical sector, healthcare products, aviation and other industries.
Specialist revenue engineers and professionals provide skilled solution consultation and specialized resolution to resolve customer’s hard quick and correct.
Comprehensive merchandise category, make sure you see “Product Centre”–“Sector Class”(PDF variety).
To produce superior worth for our consumers, shareholders, and companions is our aim.

 

/ The use of unique equipment manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our business and the shown EPT areas contained herein are not sponsored, accredited, or produced by the OEM. /

Torque  China  in   Lilongwe Malawi   esco gear coupling  near me shop  Limiters with top quality lowest price