We – EPG Group the biggest couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828
/

Brief introduction
YL positive displacement pumps are to be found in numerous processes, where their reliable low shear flow characteristics are ideally suited to the transfer of media such as unrefined sugar, sugar solution, massecuite and molasses. We select the pump according to your characteristics of medium and condition of the technological requirements, bring you the best pump for your critical process, satisfied by you and your customers.

Why our pump for your sugar
–Non-contacting pumphead design enhances the pump’s ability to handle abrasive crystalline slurries, whilst minimising product damage.
–Low running and maintenance costs with easy access to the pumphead minimising downtime, results in a reduced lifecycle cost.
–Lower power requirements than other pump technologies

Pump Working principle

The even rotation of the rotor pair creates a vacuum on the priming side of the pump, which can be defined by the direction of rotation of the drive. This vacuum draws the liquid into the pump chamber. With further rotation, the pumped medium is conveyed past the pump wall into the pressure area. Up to six chamber charges are displaced with each drive rotation depending on the rotor type. When the rotor is at a standstill, the pump seals off almost completely.

Pump Structure

Complete pump consists of bare shaft pump, coupling& shield, gear reduer with motor and baseplate. You can only have our bare shaft pump.

Pump Specifications

Note*

1. Tested medium: water. Your liquid’s density, viscosity and temperature are necessary to supply when choose the pump.

2. Speed, flow rate, EPT power and pressure will be varified according to different liquid properties.

3. Port size can be changed as needed.

4. YL reserves the right to change specifications without prior notification.

How to choose our pump
Dear Customer,
To ensure satisfactory performance of required pumps, it is important that the pump must be properly selected. Below table is for your selection guideline, which is nessary to supply us for a targeted solution and offer.

Factory workshop showing

/
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed EPT parts contained herein are not sponsored, approved, or manufactured by the OEM.

/