LT type (formerly TL type) elastic sleeve pin coupling (GB4323-2002 instead of GB4323-1984) elastic sleeve pin coupling uses a pin with an elastic sleeve (rubber material) at one end, which is installed in the two halves In the flange hole of the shaft, to realize the coupling of the two halves of the coupling.The elastic sleeve pin coupling used to be a widely used coupling in our country. It was formulated as the standard of the Ministry of Machinery in the late 20s. The JB50-08 elastic ring pin coupling is a standard coupling for all parts of our country. Device.
Basic performance parameters and main dimensions of LT type (formerly TL type) elastic sleeve pin coupling
型
| A | F | Allowable compensation | weightkg | Moment of inertiakg.m^2 | ||||||||
Y型 | Z型 | ||||||||||||
L1 | L | L2 | Radialmm | Angular | |||||||||
TLT1 | 6.3 | 8800 | 9 | 20 | 14 |
| 71 | 20 | 3 | 0.2 | 1 ° 30 ' | 1.13 | 0.0004 |
10,11 | 25 | 17 |
| ||||||||||
12,14 | 32 | 20 |
| ||||||||||
TLT2 | 16 | 7600 | 12, 14 | 32 | 20 |
| 80 | 20 | 3 | 0.2 | 1 ° 30 ' | 1.74 | 0.001 |
16,18,19,20 | 42 | 30 | 42 | ||||||||||
TLT3 | 31.5 | 6300 | 16,18,19 | 42 | 30 | 42 | 95 | 40 | 3 | 0.2 | 1 ° 30 ' | 1.89 | 0.002 |
20,22 | 52 | 38 | 52 | ||||||||||
TLT4 | 63 | 5700 | 20,22,24 | 52 | 38 | 52 | 106 | 40 | 4 | 0.3 | 1 ° 30 ' | 2.24 | 0.0045 |
25,28 | 62 | 44 | 62 | ||||||||||
TLT5 | 125 | 4600 | 25,28 | 62 | 44 | 62 | 130 | 50 | 4 | 0.3 | 1 ° 00 ' | 8.25 | 0.015 |
30,32, 35 | 82 | 60 | 82 | ||||||||||
TLT6 | 250 | 3800 | 32,35,38 | 82 | 60 | 82 | 160 | 50 | 4 | 0.3 | 1 ° 00 ' | 10.24 | 0.023 |
40,42 | 112 | 84 | 112 | ||||||||||
TLT7 | 500 | 3600 | 40,42,48 | 112 | 84 | 112 | 190 | 60 | 4 | 0.4 | 1 ° 00 ' | 15.13 | 0.058 |
TLT8 | 710 | 3000 | 45,48,50,55,56 | 112 | 84 | 112 | 224 | 60 | 4 | 0.4 | 1 ° 00 ' | 24.7 | 0.17 |
60,63 | 142 | 107 | 142 | ||||||||||
TLT9 | 1000 | 2850 | 50,55,56 | 112 | 84 | 112 | 250 | 70 | 5 | 0.4 | 1 ° 00 ' | 31.2 | 0.22 |
60,63,65,70 | 142 | 107 | 142 | ||||||||||
